Top
One stop solutions for Submersible Pump Cables

PVC 3 & 4 Core Flat Submersible Pump Cable

Construction

Conductor

High purity electrolytic grade bright annealed flexible bunched bare, copper conductor according to international standards like IS 8130, BS 6360, IEC 228 & VDE 0295.

Insulation

Specially developed dielectric grade PVC Compound impervious to water, oils, grease etc.

Sheath

Flexibel Inner Sheath & High abrasion resistant tough & flexible PVC Compound.

Standards

IS 694, BS 6500, IEC 60227, CEI 20-20, VDE 0281, SABS 1574, AS 3191, AS/NZS 5000.1, HD 21.1, NF C 32-201, French Standard 32-102-16

Working Voltage Uo/U

450/ 750 V, 600/ 1000 V, 650/1100 V

Test Voltage

3000 V

Temperature range

-150C to 700C

Core colors (For Asian, African Markets) (For European Markets)
3 core Red ,Yellow, Blue Black, Blue, Brown
4 core Red ,Yellow, Blue, Green Black, Blue, Brown, Green
Sheath color: Choice of Black or Blue Choice of Black or Blue

PVC 3 Core Flat Submersible Cable

Number of cores x cross-section
no. x sq mm
Outer dimensions

mm x mm
Max. conductor resistance at 200C
ohm /km
Current carrying capacity at 400C
amps.
3 x 1.0 10.0 x 4.6 18.1 11
3 x 1.5 11.1 x 5 12.1 14
3 x 2.5 13 x 5.9 7.41 18
3 x 4.0 15.4 x 6.7 4.95 26
3 x 6.0 17.5 x 7.5 3.3 31
3 x 10 22.3 x 9.3 19.1 42
3 x 16 26.3 x 10.8 1.21 57
3 x 25 32.2 x 13.1 0.78 72
3 x 35 35.9 x 14.3 0.554 90
3 x 50 41.4 x 16.5 0.386 115
3 x 70 50.5 x 19.5 0.272 143
3 x 95 58.5 x 22.5 0.206 165

PVC 4 Core Flat Submersible Cable (with Ground)

Number of cores x cross-section
no. x sq mm
Outer dimensions

mm x mm
Max. conductor resistance at 200C
ohm /km
Current carrying capacity at 400C
amps.
4G x 1.0 12.6 x 4.6 18.1 11
4G x 1.5 14.2 x 5.0 12.1 14
4G x 2.5 16.5 x 6.0 7.41 18
4G x 4.0 19.7 x 6.7 4.95 26
4G x 6.0 22.7 x 7.7 3.3 31
4G x 10 28.6 x 9.4 19.1 42
4G x 16 34.3 x 11.0 1.21 57
4G x 25 4.2 x 13.2 0.78 72
4G x 35 47.4 x 14.7 0.554 90
4G x 50 55.0 x 16.8 0.386 115
4G x 70 65.7 x 20 0.272 143
4G x 95 76.4 x 23 0.206 165

Note:

Insulation thickness, Sheath thickness and overall dimensions are nominal values. The number of wires is approximate and strand diameter is nominal; they shall be such as to satisfy the requirements of conductor resistance as per IS 8130/1984, BS-6360, IEC-60228 & VDE-0295.